HR200WK Single Room Vent-Axia Heat Recovery Unit (14120020)

£604.28 (excl. VAT) / £725.14 (incl. VAT)

HR200WK Single Room Heat Recovery Unit (14120020) by Vent-Axia

  • Single room residential heat recovery ventilation unit for kitchens/utility rooms
  • 3 speed motor
  • 220 m³/hr
  • Integral washable filter
  • Up to 75% heat recovery
  • Saves energy – controls condensation
  • Low noise
SKUNameDescriptionPriceBuy
VA-HR200WKHR200WK Single Room Vent-Axia Heat Recovery Unit (14120020)£604.28 (excl. VAT) / £725.14 (incl. VAT)
Allow 2-3 days for delivery on this item

HR200WK Single Room Vent-Axia Heat Recovery Unit (14120020)

Heat Recovery Ventilation

The Vent-Axia HR200WK is a heat recovery ventilation unit specifically designed for use in domestic kitchens and utility rooms to meet the Building Regulations. The unit is also suitable for light commercial applications up to 220m3/h (61l/s). The compact, self contained unit is designed for through-the-wall mounting.

The three speed, external rotor motor has two matched impellers to ensure a controlled airflow through the unit, with exceptionally economical 25Watt low speed power consumption.

Easy Installation

The HR200WK fits through walls up to 335mm thick requiring a fixing hole 250mm square. The internal grille has washable, polymeric foam supply and extract filters. Only the neat internal twin grille is visible from the room. A wall extension sleeve is available for walls up to 550mm thick.

Heat Exchanger

The highly efficient, polymeric heat exchanger cube is washable. The compact cube interleaves outgoing moist warm air with incoming fresh air and allows the heat from one to warm the other without the two air streams mixing. Up to 75% of the heat, which would otherwise be lost, is transferred to the intake air, ensuring energy saving ventilation.

Electrical

HR200WK 220-240V/1/50Hz Class 1 earthed appliance. The 3 speed motor, can be wired to operate On/Off for any one of the three speeds. Alternatively, an Ambient Response Humidity Sensor or simple changeover switch can be used to provide switching between any two speeds, giving permanent trickle ventilation and automatic changeover to a higher speed during periods of high moisture generation. Also the 3 speed controller enables the unit to be switched from permanent trickle to either medium or boost speed.

Typical Installation

The HR200WK fits through walls up to 335mm thick requiring a fixing hole 250mm square. The internal grille has washable, polymeric foam supply and extract filters. Only the neat internal twin grille visible from the room.

A wall extension sleeve is available.

Maintenance

Apart from removing odours, providing fresh air and recovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. These gradually build up and detract from the efficiency and appearance of the appliance. Therefore to ensure peak performance, the appliance should be cleaned regularly. Filters should be replaced every six months or as conditions necessitate. Quick release grilles give instant access to the integral washable filters. The heat exchanger and grille should be washed in warm soapy water every twelve months or as conditions necessitate.

Brand

Vent-Axia

Heat Recovery - air volume

0-450 m³/hr

Heat Recovery - mounting type

Through Wall

HR200WK - Catalogue Page

HR200WK MVHR - Eco Tech Data

HR200WK - Install and maintenance manual

You have not viewed any products yet.