Single Blade Balancing Damper
£19.04 – £57.09 (Excl. VAT)
Blast Gate Damper
£39.10 – £532.31 (Excl. VAT)
Iris Dampers
£46.49 – £392.95 (Excl. VAT)
Iris Dampers for circular ducting are available for diameters ranging from 80mm – 400mm.
- Iris dampers allow for simple and precise flow tests to be measured and controlled at a single station.
- Each Iris Damper has manometer connections allowing direct pressure measurements (if required).
- Airflow, pressure drop, and sound requirements are the criteria to consider when using an Iris damper as part of a ventilation duct system.
Iris Dampers for circular ducting are available for diameters ranging from 80mm – 400mm.
- Iris dampers allow for simple and precise flow tests to be measured and controlled at a single station.
- Each Iris Damper has manometer connections allowing direct pressure measurements (if required).
- Airflow, pressure drop, and sound requirements are the criteria to consider when using an Iris damper as part of a ventilation duct system.
- This product will not shut off airflow completley, consider a single blade blancing damper should you wish to do this.
Additional information
| Iris-damper-diameter | 80mm, 100mm, 125mm, 150mm, 160mm, 200mm, 250mm, 300mm, 315mm, 400mm |
|---|---|
| Spiral - Diameter | 100mm Ø, 125mm Ø, 150mm Ø, 160mm Ø, 200mm Ø, 250mm Ø, 300mm Ø, 315mm Ø, 355mm Ø, 400mm Ø, 180mm Ø, 224mm Ø, 280mm Ø, 80mm Ø |
| Spiral - Part Type | |
| Spiral - Volume Control Type | |
| Product Group | Iris Dampers |
Data Sheet
(pdf, 1302KB)