Self-adhesive Stick Pins – Mechanical fixing for insulation – 60mm

Stick pins – The easy way to secure insulation.

• Stick pins are an easy and simple solution to help you fix insulation.
• Provide a fast mechanical fixing.
• Useful for ceilings, ensures that the insulation is in place before plasterboard is fixed.
• Stops the insulation hanging down before the plasterboard is fixed.
• Corrosion resistant.
• Rapid insulation attachment.
• Strong and easy to use.
• Supplied with securing discs.

How to use stick pins to secure insulation.

1. Simply peel off the backing tape.
2. Stick the pins to the surface where the insulation will be placed.
3. Remove the fixing disc.
4. Put the insulation in place, and push the insulation onto the pin.
5. Push the fixing disc over the pin.
6. IMPORTANT NOTE – ADD THE CAP OR BEND THE PIN OVER ON ITSELF TO AVOID IT IMPALING SOMEONE.
7. Your insulation is now hanging without the fear of falling out.
8. Super sticky, good luck getting them off if you stick them in the wrong place!

Recommended installation for self adhesive insulation hangers.

It is recommended that you place the stick pins 300 mm apart around the edge of  the area were the insulation is top be secured.  400mm apart is adequate in the centre areas of the fixing area. This spacing ensures that sag will not occur if using rock-wool type insulation and will also ensure that there are enough mechanical fixings to hold the weight of thicker rigid insulation boards.