80mm Ø

ImageNameSummaryPriceBuy
100mm to 80mm Reducer

100mm to 80mm Reducer for Metal Ducting

  • Reduce from 100mm Diameter to 80mm.
  • Galvanised metal reducer.
  • Male spigots on each end.
£8.93 (Excl. VAT)
80mm Saddles

Saddle for 80mm diameter duct.

Branching onto 80mm, 100mm, 125mm, 150-160mm & 180-224mm duct.

  • AØ and is the size of the duct that the saddle is coming off.
  • BØ is the size of the duct that you wish to branch onto.
  • Please note: Due to the high turn over of this product flange sizes may vary.

 

£7.00 (Excl. VAT)
150mm Reducers

150mm Reducers for Metal Ducting

  • Reduce from 150mm Diameter to 80mm, 100mm, 125mm
  • Galvanised metal reducer.
  • Male spigots on each end.
£8.93£15.12 (Excl. VAT)
160mm Reducers

160mm Reducers for Metal Ducting

  • Reduce from 160mm Diameter to 80mm, 100mm, 125mm &150mm.
  • Galvanised metal reducer.
  • Male spigots on each end.
£8.93£16.15 (Excl. VAT)
Spiral Duct -3m

Please Note: 3m Spiral duct is only available for deliveries into all London boroughs and the South East home counties (Berkshire, Buckinghamshire, Essex, Hertfordshire, Kent, Surrey, and Sussex) .

Contact us for more information for deliveries that are required outside of our normal delivery areas.

£24.01£526.66 (Excl. VAT)
Depending on Location, addtional delivery charges may be required on this particular product.
45 Degree Bends

45 degree pressed & segmented steel ventilation bends

  • Manufactured from galvanised mild steel in accordance with DW144 specifications.
  • 80-200mm bends are pressed.
  • 224mm and upwards are segmented bends.
  • Next day delivery available.
£6.45£458.49 (Excl. VAT)
Flanged Spigot (IL) for Circular Spiral DuctingA flanged spigot is ideal for branching off rectangular ductwork as it can be fixed …£2.92£34.11 (Excl. VAT)
Galvanised Flat Shoes

Flat shoes to suit a range of circular duct diameters.

£18.33£176.00 (Excl. VAT)
90 Degree Bends

90 Degree Mild Steel (Galvanised) Bend for Spiral Duct

  • 80mm – 1000mm diameters available.
  • Large Stock on all diameters stocked.
  • Manufactured in accordance with DW144 specifications.
£8.35£734.76 (Excl. VAT)
Female Couplers

Female Coupler

  • Use for joining spiral fittings such as 2x 45 degree bends together.
  • Galvanised steel female collar.
£2.87£38.58 (Excl. VAT)
Male Couplers
  • Allows two lengths of spiral tube ducting of the same diameter to be connected together.
  • Galvanised steel male collar.
£2.87£43.07 (Excl. VAT)
Shallow End CapsA shallow end cap is used as a termination point for spiral circular ducting. For …£3.03£106.24 (Excl. VAT)
Spilt rings for Circular Spiral Ducting

Duct Split Rings

  • 80mm – 1000mm spiral suspension rings.
  • Easy install.
  • Use 1 pair every 2-3m.
£3.95£33.46 (Excl. VAT)
Iris Dampers

Iris Dampers for circular ducting are available for diameters ranging from 80mm – 400mm.

  • Iris dampers allow for simple and precise flow tests to be measured and controlled at a single station.
  • Each Iris Damper has manometer connections allowing direct pressure measurements (if required).
  • Airflow, pressure drop, and sound requirements are the criteria to consider when using an Iris damper as part of a ventilation duct system.
£46.49£392.95 (Excl. VAT)