15 Degree Bends 15 Degree Galvanised Mild Steel Ducting Bends
Stocked sizes from 80mm – 1000mm diameter.
80 – 200mm are pressed bends.
224mm upwards are segmented bends.
£ 13.48£ 81.05(Excl. VAT) 200mm Saddles Saddle for 200mm diameter duct.
Branching onto 200mm, 224-250mm, 280-315mm, 355-400mm & 450-560mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£ 10.07(Excl. VAT) 250mm Saddles Saddle for 250mm diameter duct.
Branching onto 250mm, 280-315mm, 355-450mm & 450-560mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£ 17.18(Excl. VAT) 280mm Saddles Saddle for 280mm diameter duct.
Branching onto 280mm, 300mm, 315mm, 355mm, 400mm, 450mm,500mm, 560mm, 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
280mm saddles are fabricated and not pressed.
£ 35.35(Excl. VAT) 30 Degree Bends 30 Degree mild steel bend for duct
80-200mm diameter bends are pressed.
224mm diameter are segmented bends.
Manufactured in accordance with DW144 specifications.
£ 8.66£ 77.19(Excl. VAT) 300mm Saddles Saddle for 300mm diameter duct.
Branching onto 300mm, 315mm, 355mm, 400mm, 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£ 37.08(Excl. VAT) 315mm Saddles Saddle for 315mm diameter duct.
Branching onto 315mm, 355mm, 400mm, 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£ 33.99(Excl. VAT) 355mm Saddles Saddle for 355mm diameter duct.
Branching onto 355mm, 400mm, 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£ 54.31(Excl. VAT) Spiral Duct -3m Please Note: 3m Spiral duct is only available for deliveries into all London boroughs and the South East home counties (Berkshire, Buckinghamshire, Essex, Hertfordshire, Kent, Surrey, and Sussex) .
Contact us for more information for deliveries that are required outside of our normal delivery areas.
£ 24.01£ 526.66(Excl. VAT) 400mm Saddles Saddles for 400mm diameter duct.
Branching onto 400mm, 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£ 60.80(Excl. VAT) 45 Degree Bends 45 degree pressed & segmented steel ventilation bends
Manufactured from galvanised mild steel in accordance with DW144 specifications.
80-200mm bends are pressed.
224mm and upwards are segmented bends.
Next day delivery available.
£ 6.45£ 458.49(Excl. VAT) Flanged Spigot (IL) for Circular Spiral Ducting A flanged spigot is ideal for branching off rectangular ductwork as it can be fixed … £ 2.92£ 34.11(Excl. VAT) Galvanised Flat Shoes Flat shoes to suit a range of circular duct diameters.
£ 18.33£ 176.00(Excl. VAT) 450mm Saddles Saddles for 450mm diameter duct.
Branching onto 450mm, 500mm, 560mm & 600mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£ 67.67(Excl. VAT) 500mm Saddles Saddles for 500mm diameter duct.
Branching onto 500mm, 560mm, 600mm, 630mm & 710mm duct.
AØ and is the size of the duct that the saddle is coming off.
BØ is the size of the duct that you wish to branch onto.
Please note: Due to the high turn over of this product flange sizes may vary.
£ 76.73(Excl. VAT) 560mm Curved Boots Curved boots for 560mm diameter duct.
Branching onto 560mm, 600mm, 630mm, 710mm & 800mm duct.
AØ and is the size of the duct that the boot is coming off.
BØ is the size of the duct that you wish to branch onto.
£ 127.12(Excl. VAT) 560mm Reducers 560mm Reducers for Metal Ducting
Reduce from 560mm Diameter to 250mm, 300mm, 315mm, 355mm, 400mm, 450mm & 500mm
Galvanised metal reducer.
Male spigots on each end.
£ 87.38(Excl. VAT) 60 Degree Bends 60 degree steel ducting bends
Full range of diameters from 80mm – 600mm.
80mm to 200mm are pressed bends.
224mm and above are segmented bends.
Next day delivery available on stocked diameters.
£ 11.63£ 162.41(Excl. VAT) 600mm Reducers 600mm Reducers for Metal Ducting
Reduce from 600mm Diameter to 250mm, 300mm, 315mm, 355mm, 400mm, 450mm, 500mm & 560mm
Galvanised metal reducer.
Male spigots on each end.
£ 108.33(Excl. VAT) 630mm Reducers 630mm Reducers for Metal Ducting
Reduce from 315mm Diameter to 300mm, 315mm, 355mm, 400mm, 450mm, 500mm, 560mm & 600mm
Galvanised metal reducer.
Male spigots on each end.
£ 108.33(Excl. VAT) 710mm Reducers 710mm Reducers for Metal Ducting
Reduce from 710mm Diameter to 355mm, 400mm, 450mm, 500mm, 560mm & 630mm
Galvanised metal reducer.
Male spigots on each end.
£ 155.15(Excl. VAT) 800mm Reducers for Spiral Ductwork 800mm Reducers for Metal Ducting
Reduce from 800mm Diameter to 400mm, 450mm, 500mm, 560mm, 600mm, 630mm & 710mm
Galvanised metal reducer.
Male spigots on each end.
£ 181.06(Excl. VAT) 90 Degree Bends 90 Degree Mild Steel (Galvanised) Bend for Spiral Duct
80mm – 1000mm diameters available.
Large Stock on all diameters stocked.
Manufactured in accordance with DW144 specifications.
£ 8.35£ 734.76(Excl. VAT) 90 Degree Twin Bends A 90 degree twin bend allows two 90 degree branches to come of the main … £ 63.22£ 501.45(Excl. VAT) Female Couplers Female Coupler
Use for joining spiral fittings such as 2x 45 degree bends together.
Galvanised steel female collar.
£ 2.87£ 38.58(Excl. VAT) Male Couplers
Allows two lengths of spiral tube ducting of the same diameter to be connected together.
Galvanised steel male collar.
£ 2.87£ 43.07(Excl. VAT) Shallow End Caps A shallow end cap is used as a termination point for spiral circular ducting. For … £ 3.03£ 106.24(Excl. VAT) Roof Cowls Galvanised mild steel roof cowl
Full range of extractor fan roof vents 100mm – 150mm diameters & 160mm – 630mm diameters.
Hand made vent cowls.
Prevent rain ingress when air is extract through a roof.
Design incorporates a top hat to prevent rain entering the duct
Fitted with mesh to stop wildlife entering into the duct termination point.
£ 50.02£ 231.53(Excl. VAT) Spilt rings for Circular Spiral Ducting Duct Split Rings
80mm – 1000mm spiral suspension rings.
Easy install.
Use 1 pair every 2-3m.
£ 3.95£ 33.46(Excl. VAT) Spiral Access Doors Curved Access Doors
Easy to install.
Sizes to suit most diameters of circular duct.
Provide an airtight seal at inspection points.
Self adhesive disposable duct hole cut out template
Installation instructions packaged with each access door.
£ 11.98£ 32.49(Excl. VAT) Single Blade Balancing Damper £ 19.04£ 57.09(Excl. VAT) 
